I needed a smaller beachy sign for my 3 Tiered Tray, and I knew I could make one. But I didn't want to go buy anything, so I started searching around the house. I went outside to look through the scrap wood pile and found a perfect small. I sanded it just a tad, and then painted it white.
After it was dry, I sanded the top and edges to give it a vintage vibe. Then I grab the Beach Vibes Transfer (retired), Shimmer Splash Chalk Paste, a Small Squeegee and a stir stick.
Here's the Beach Vibes Transfer (Retired) That I used
I only used the top portion of the transfer that says "beach". Once cut, I laid the transfer on the block in the middle and pressed to make sure it was adhered.
I opened the Shimmer Splash Chalk Paste and gave it a good stir with a Stir Stick. I normally add a spray or two of distilled water to make sure its not too dry. I have noticed that most of the shimmer pastes stay well. They don't get many clumps at all.
Once the paste is stirred up well, I take out a small amount with the Stir Stick and put it in the transfer.
Then I take my Small Squeegee and spread the paste all over the mesh areas.
Once completed covered in paste. Lift up the transfer from the wood and wash immediately. This will keep your transfers sticky and you can use it many times!
Look how easy that was! Just imagine what you could make for your home.
Watch this video and more on my Tik Tok Channel.