Monday, February 3, 2020

February Club Couture



February is finally here which means a new transfer! I can't wait to get it and try it out. But I wanted to let you see it ASAP! Once I get and and chalk it up, I will do another post to show how I used the transfer. 



Supplies Needed:

Club Couture Transfer: 
Welcome to Our Home

Chalkology Paste Singles: 
Raspberry Sorbet
Mauvelous
Eucalyptus

Tools: 
Small Squeegee
Mini Squeegee
Transfer Trimmers
Fuzzing Cloth
Self-Healing Work Mat
Permanent Marker

Surface: 
Box Frame (9" × 12")

Color and Placement for Club Couture: Welcome to Our Home 
1. “welcome to our”: Raspberry Sorbet
2. H,M,E letters: Mauvelous
3. Wreath “O”: Eucalyptus

4. Berries: Raspberry Sorbet


Follow these instructions to complete the Club Couture project:
1. Prepare your Chalk Transfer by removing it from the packaging and cut apart the individual elements. Label the backer papers with marker to correspond with the image. This makes cleanup easier.

2. When you remove the backer from the Transfer screen, be sure to “fuzz” each element to gentle the adhesive by sticking the adhesive screen to a Fuzzing Cloth or terry cloth towel to pick up a bit of lint before applying it to your surface.

3. Position your Transfer elements on the board and smooth them out to adhere to your surface, ensuring there are no bubbles.

4. Prepare your Chalkology Pastes by kneading the packets, tearing off corners, and squeezing desired amounts onto a dish or other palette surface. Stir paste if using 3 US fl. oz. jars.

5. Use a generous amount of Chalkology Paste on the desired squeegee and smooth it over the Transfer (see color and placement suggestions above).

6. Once the screen portion of the design is completely covered, scrape the excess paste off as evenly as possible and wipe unused paste back onto the palette or into the jar. The more excess paste you remove, the better the result.

7.Carefully peel back the Transfer before the paste dries and immediately put it in water to clean thoroughly. Once clean, let dry with sticky side up.


8. For best results, wash and dry each Transfer element and the squeegee before reusing. 

9. Allow sufficient dry time of your surface (or use a hair dryer to speed drying) before layering subsequent steps; especially when placing the berries on your wreath.

10. Repeat these basic techniques with all elements of your design.

11. Once all the Transfer elements are clean and dry, reapply all backers and store flat.



Want to watch a video on how it is done- Click Here!

If you need to add a Kick Start Kit- Read all about it here. 

Wanna shop for some Chalk Couture stuff? Click here to check out all the amazing items! 

And as always, help a sister out by sharing this post, like it and leave me a comment! 

Until then...

Sara ;) 

No comments:

Post a Comment

Google Analytics

AUTO ADS BODY