Supplies Needed
-Club Couture Transfer: Rise up
-Chalkology Paste Singles: Couture Coral, Tide, Ocean Mist
-Tools: Mini Squeegee (2), Small Squeegee, Color Trays, and Fuzzing Cloth
-Surface: Double-Sided Box Frame (9" × 12")
Color and Placement for Club Couture
1. Frame: Ocean Mist
2. “May the road” and “to meet you”: Couture Coral
3. “Rise up”: Tide
Follow these instructions to complete the Club Couture project:
1. Prepare your Chalk Transfer by removing it from the packaging.
2. When you remove the backer from the Transfer screen, be sure to “fuzz” it to gentle the adhesive by sticking the adhesive screen to a Fuzzing Cloth or terry cloth towel to pick up a bit of lint before applying it to your board.
3. Position the Transfer and smooth to adhere to your surface, ensuring there are no bubbles.
4. Prepare each Chalkology Paste by kneading the packet, tearing off the corner, and squeezing the desired amount onto one of your Color Trays or another palette surface. Stir paste if using 3 US fl. oz. jar.
5. Use a generous amount of Chalkology Paste on the Squeegee and smooth it over the Transfer (see color and placement suggestions below) according to your color preferences for each element of the design.
6. Once the screen portion of the design is completely covered, squeegee the excess paste off as evenly as possible and scrape unused paste back into the jar or palette. The more excess paste you remove, the better the result.
7. Use the “chalk-and-pull” method as needed to carefully pull back the top part of the Transfer (with wet paste) before it dries. Carefully lay the Transfer back down on your surface and continue with other elements.
8. When finished, slowly peel back the Transfer before the paste dries and immediately put it in water to clean thoroughly.
9. Once clean, let dry with the sticky side up.
10. Once all the Transfer elements are clean and dry, reapply all backers and store flat.
Until then...
Sara ;)
No comments:
Post a Comment